Insurance measures and precautions for large amusement equipment

Insurance measures and precautions for large amusement equipment

431

2021/9/26 5:22:48

Insurance measures and precautions for large-scale amusement equipment How dgno9i can operate large-scale amusement equipment is a topic that many large-scale amusement equipment manufacturers and entertainment venue investors are concerned about. In order to protect the interests of new and old customers who have been supporting Jinma Amusement infinitely, let me share with you the precautions for large-scale amusement equipment:

Insurance measures are the top priority. As long as the insurance measures are done well and in place, 98% of unnecessary things can be reduced.

Insurance measures and precautions 1: Belt. The belt can be used alone on the facilities with slight swing or slow lifting speed, no flipping and no danger of being thrown out. Generally, the belt should be equipped with an auxiliary handle. For intense sports facilities, the belt can be used as an auxiliary restraint device. Fences should be set at the entrance and exit respectively, and guide fences should be set at the entrance. The platform should have anti-skid measures.

Insurance measures and precautions 2: Grid. The opening direction of the fence gate should be consistent with the direction of travel of passengers (except in special circumstances). In order to prevent injury to the hands of personnel when the door is closed, the gap between the door frame and the column should be appropriate, or other protective measures should be taken. For amusement facilities that ride on and off while running, the entrance and exit of the passenger part should not be higher than 300 mm from the platform. The height of the entrance and exit of the passenger part of other amusement facilities from the platform should be easy to get on and off.

Insurance measures and precautions three: large pressure bar. When the amusement equipment is running, it may cause the danger of the passengers being thrown out, and the corresponding type of pressure bar must be installed; the pressure bar itself must have sufficient strength and locking force to ensure that the passengers are not thrown or dropped, and the pressure bar itself must have sufficient strength and locking force. The device remains locked until it ceases to function.

Reminder:

When the amusement facility is in operation, the power supply is suddenly cut off or the equipment fails, endangering the passengers, an automatic or manual emergency stop device must be provided;

After the amusement equipment fails during operation, measures should be taken to relieve passengers;

Amusement facilities should set up conspicuous signs in necessary places and parts;

Exposed sharp edges, sharp corners, burrs and dangerous protrusions are not allowed where passengers can reach;

The culvert through which the amusement facilities pass should be made of materials that are not easy to fall off, and the decorations should be firmly fixed. The passenger part must be marked with the number of occupants, and overloading is strictly prohibited;

When the amusement facilities are in operation, when the passengers may be moved, collided or thrown out or slipped out of the ride, a passenger restraint device must be provided;

For more dangerous amusement facilities, two sets of independent restraint devices should be considered if necessary.