Matters needing attention in the installation of luxury carousel

Matters needing attention in the installation of luxury carousel

2018-10-20 69 times

Luxury carousel can be divided into many types, such as small luxury carousel and large luxury carousel and so on. Many merchants can choose the type of luxury carousel that meets their requirements according to their own needs. After purchasing the luxury carousel, the merchant needs to install it. So what precautions should the staff have in the process of installing the luxury carousel?

(1) Installation method using copper rod and hammer. It is a relatively simple method to use manual hammering to install medium and small rolling bearings. When the Xiao bearing is installed on the shaft, it is not allowed to directly hit the outer ring with a hammer, but additional tools such as copper rods should be used to evenly tap the end face of the inner ring of the bearing. Slow afterburner.

(2) Install with casing. The advantage of using the sleeve installation method is that after the tapping of the sleeve, the force can be evenly distributed on the entire end face of the ferrule on which the bearing of the children's play equipment is installed, and can be used with a press. When manufacturing the casing, it should be noted that if the bearing of the children's play equipment is installed on the shaft, the inner diameter of the tube is slightly larger than the shaft diameter, and the thickness is 2/3-4/5 of the thickness of the inner ring of the bearing. The tube is vertical. When installing the bearing outer ring into the casing, the outer diameter of the sleeve is slightly smaller than the outer diameter of the installed bearing.

When using the sleeve to install the bearing, if it is not a large part, it can be carried out on a bench vise. In order to prevent the shaft from being damaged, the jaws should be padded with copper or aluminum sheets. When installing, tap evenly and slowly. When the casing end cap is flat, a hammer must be used to knock both sides of the square casing evenly along the circumference. When the casing end cover is spherical, the center of the ball cover should be tapped.

The inner and outer rings of tapered roller bearings can be separated. When assembling, the inner ring can be press-fitted onto the shaft with rolling elements, and the outer ring can be installed in the bearing seat hole separately. When installing the outer ring, the sleeve should be placed on the end face of the bearing outer ring, not on its inclined surface.

Luxury carousel If there is interference between the inner ring and the shaft, the outer ring and the casing hole of the bearing, the end face of the sleeve should be made into a ring that presses the end faces of the inner and outer rings at the same time to prevent the cage from being damaged. The disc and the casing are used together, so that the pressure is transmitted to the outer ring at the same time, and the bearing of the children's amusement equipment is pressed into the shaft and the casing. This installation tool is only suitable for the installation of bearings whose cage does not protrude from the end of the ring, especially suitable for the installation of self-aligning radial ball bearings.