The Leading Amusement Ride Manufacturer in China.

Maintenance Tips for Large Amusement Equipment

by:Jinma Rides     2022-03-19
Maintenance Tips for Large Amusement Equipment

2018-08-22 89 times

If the large amusement equipment is used for a long time, it will only reduce the lifespan, but if you want to prolong the lifespan and ensure safety, then daily cleaning and maintenance is essential, and in the current spring, it is the season of high incidence of epidemic viruses, Strict maintenance and cleaning can effectively prevent cross-infection of children's diseases. So, do you know the tips for cleaning and maintenance of amusement facilities?

1. If it is an indoor activity room, floor, wall, etc., it needs to be sterilized by ultraviolet radiation every day, and the room should be ventilated regularly. Disinfect by spraying with hydrogen peroxide once a week.

2. When cleaning the electrical parts of the circuit, first of all, make sure that the power is cut off and watering is prohibited. Generally, use a damp cloth to scrub, and connect the power supply after the facilities are completely dry.

3. If the metal parts are to be rusted, you can first use a brush to remove the floating rust and wipe it with a dry cloth; after exposure to the sun, you can buy some colorless self-spraying paint, and sweep the edges about 20 cm away from the facility Spray it once, and then spray it again after drying to protect it from falling. Wait until the paint is completely dry before cleaning, drying and disinfection.

4. The part of the soft sponge can be washed with a soft cloth and soapy water, or placed in the sun for disinfection.

5. All large-scale amusement equipment, such as open-air slides, drill pipe parts, etc., should not have accumulated water after rainy days. If there is accumulated water, a small hole with a diameter of about 4 mm should be drilled at the lowest point drain.

Six, moisture-resistant, heat-resistant, non-fading wooden parts can be washed with soapy water first, then dried in the sun, and then sprayed with 84 disinfectant for disinfection.

7. The plastic part and glass fiber can be diluted and soaked with soapy water, disinfectant washing powder, bleaching powder, etc., then scrub with a soft cloth or soft brush, then rinse with water, dry with a cleaning cloth or dry in the sun. Finally, spray with 84 disinfectant to disinfect.

Eight. Of course, when sterilizing large amusement equipment, you must also check whether the connecting parts are firm, whether the metal frequently moving connecting parts are refueled, and whether electrical appliances and common components are damaged.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: