What are the precautions for the maintenance of large amusement equipment

What are the precautions for the maintenance of large amusement equipment

2019-10-23 09:59:2585

Precautions for the operation of amusement equipment 1. Before the official operation, the empty car should be operated 3 times according to the actual working conditions to confirm that everything is normal, and then start up for business. 2. Ring the bell before starting the machine as a warning, and keep the passengers and service personnel waiting to get on the plane away from the amusement facilities to prevent bumps after starting the machine. Turn it on again after confirming that the surrounding environment is OK. 3. When the passengers are afraid and shouting loudly, the ones that can stop should stop immediately and let the passengers get off. 4. During the operation of the amusement facilities, the operator must not leave the post. Once there are signs of an accident, the operator should immediately take emergency measures. 5. The location of the emergency stop button must be known to the staff related to the amusement facilities of this station, so that everyone can operate it when emergency stop is required. 6. The lubrication condition should be normal, the meshing tooth surface of the slewing bearing should have no radial movement and serious wear, and the slewing bearing should have no abnormal noise, vibration impact, sudden increase in power and other abnormal phenomena during operation. The seal should be good. There should be no abnormal sound. The bearing temperature rise should be normal. The oil level of the reducer should be normal. 7. During operation, the oil temperature and temperature rise should be installed normally. The fixed condition should be good, and the amount of lubricating oil without loosening should be normal. The installation condition should be good without loosening. 8. The temperature rise of the coupling should be normal, there should be no leakage or oil leakage, and the lubrication should be good. 9. The temperature rise of the bearing should be normal and there should be no abnormal sound. 10. The lubricating condition of the pulley should be good. 11. The door switch of the gondola should be flexible. There should be no damage. The fasteners related to the wheel and the track should be good. The lock at the shaft end should be good to prevent loosening. 12. The wear of wheels and rail wheels should not exceed the standard, and there should be no cracks and other defects. There should be no rust and corrosion at the connection between the column and the foundation. The tire pressure of the wheels should be moderate.