Maintenance measures for new-type amusement equipment ground net bumper cars
by：Jinma Rides
2022-08-29
Maintenance measures for new-type amusement equipment ground net bumper cars
75
2022/5/31 3:34:32
Bumper car amusement equipment is a popular amusement equipment all over the world. It is very popular with tourists. How to ensure the tourists' ān quán while having fun? Therefore, bumper cars must be carefully checked before running to avoid reducing failures during driving. , guarantee ān quán.
Bumper car is a new type of children's amusement equipment with strong participation, which is very popular with tourists. New rides for bumper cars without Skynet and new rides for common battery bumper cars, etc. The new type of bumper car amusement facility is a kind of amusement equipment that vehicles can run arbitrarily in a fixed venue and collide with each other. There are Skynet bumper car rides that are driven by DC motors. The two electrodes for power supply are set on the floor and ceiling (or nets) respectively, and the power is connected through the trailing needles (ie Ferris bows) on the car body, so that the motor drives the car body. run. The bumper car rides are driven by the passengers themselves, free to choose collisions, and reliable. Visitors can feel the excitement of self-driving and collision, the excitement of competition and the personal experience of self-driving. The new rides for bumper cars are attractive to tourists. As a popular bumper car amusement facility in the playground, maintenance is to be done well. After all, there are many people playing this facility, but how to carry out proper maintenance in the early stage of being put into use?
When the new type of bumper car rides are first put into operation, it is inevitable that they need to go through the running-in stage. During the break-in phase, the performance and quality of the bumper car rides will usually differ from the normal operation phase. Now, let me give you a detailed introduction to the running-in stage of bumper car rides, hoping to be helpful to you. How should the maintenance and maintenance inspection of the new amusement facilities of bumper cars be done?
1. Maintenance and maintenance of new amusement equipment for bumper cars
1. Check whether the screws of the incoming power supply of the rectifier cabinet of the bumper car amusement facilities are loose (check frequently), and tighten them immediately if they are loose.
2. If the insulating rubber sleeve of the small conductive wheel of the bumper car rides is damaged, it should be replaced in time. (check once a day)
3. Check whether the installation screws of the conductive wheels of the bumper car rides are loose, and the rubber on the screws of the conductive wheels must not be broken. If there are any cracks, replace them in time (check once a day).
4. Add butter to the small conductive wheels of bumper car rides once a month. (The small conductive wheel plus must be removed)
5. The inflation standard of bumper car rides: between 1.8 kg and 2 kg (check once a day), inflate in time.
6. The brake screws of the bumper car rides should not be too tight or too loose. The standard is to hold the accelerator for 2 to 3 seconds to start the bumper car rides.
Second, the maintenance and maintenance of the new type of bumper car amusement facilities floor
1. Floor maintenance: Every day before the bumper car rides open for business and after the business closes at night, the ground is mopped with a semi-wet mop.
2. Check the top wires on the floor lines around the bumper car rides every day, and tighten them in time if they are loose.
3. Tow with diesel or kerosene once every 2 to 3 months, the main purpose is to decontaminate and prevent rust.
4. Check the ground every time the bumper car rides are turned on. Metals and sundries are not allowed. The main purpose is to prevent the control cabinet from burning.
5. Check that the screws around the bottom plate of the bumper car rides are all tightened once a day.
6. Check the opening screws of each floor. If the 2nd, 4th, 6th, 7th, and 8th screws are loose, tighten them in time, once a day.
In the running-in stage of the new amusement equipment of bumper cars. The new friction contact surface has some roughness, and the contact area of the test machine is very small. Therefore, at the beginning of the running-in of the bumper car rides, the wear is very rapid. The contact area gradually increases, the surface becomes relatively smooth and flat, and the wear rate gradually decreases. When it reaches a certain level, it tends to be stable, and this is the end of the running-in stage. The wear amount in this period is called the initial wear amount.
The running-in stage of the new amusement facilities of bumper cars is that people consciously use the slight wear at this stage to create conditions for stable wear and tear in normal operation. In this stage, for the facilities that have not been run-in, the regulations such as load reduction, deceleration, and reasonable operation should be followed, lubricating oil with lower viscosity should be added, and the temperature should be kept as constant as possible. In addition, in order to shorten the running-in period, appropriate processes can be adopted to improve the utilization rate of the facilities. When the running-in is completed, clear the lubrication system and use lubricating oil that meets the quality requirements.
75
2022/5/31 3:34:32
Bumper car amusement equipment is a popular amusement equipment all over the world. It is very popular with tourists. How to ensure the tourists' ān quán while having fun? Therefore, bumper cars must be carefully checked before running to avoid reducing failures during driving. , guarantee ān quán.
Bumper car is a new type of children's amusement equipment with strong participation, which is very popular with tourists. New rides for bumper cars without Skynet and new rides for common battery bumper cars, etc. The new type of bumper car amusement facility is a kind of amusement equipment that vehicles can run arbitrarily in a fixed venue and collide with each other. There are Skynet bumper car rides that are driven by DC motors. The two electrodes for power supply are set on the floor and ceiling (or nets) respectively, and the power is connected through the trailing needles (ie Ferris bows) on the car body, so that the motor drives the car body. run. The bumper car rides are driven by the passengers themselves, free to choose collisions, and reliable. Visitors can feel the excitement of self-driving and collision, the excitement of competition and the personal experience of self-driving. The new rides for bumper cars are attractive to tourists. As a popular bumper car amusement facility in the playground, maintenance is to be done well. After all, there are many people playing this facility, but how to carry out proper maintenance in the early stage of being put into use?
When the new type of bumper car rides are first put into operation, it is inevitable that they need to go through the running-in stage. During the break-in phase, the performance and quality of the bumper car rides will usually differ from the normal operation phase. Now, let me give you a detailed introduction to the running-in stage of bumper car rides, hoping to be helpful to you. How should the maintenance and maintenance inspection of the new amusement facilities of bumper cars be done?
1. Maintenance and maintenance of new amusement equipment for bumper cars
1. Check whether the screws of the incoming power supply of the rectifier cabinet of the bumper car amusement facilities are loose (check frequently), and tighten them immediately if they are loose.
2. If the insulating rubber sleeve of the small conductive wheel of the bumper car rides is damaged, it should be replaced in time. (check once a day)
3. Check whether the installation screws of the conductive wheels of the bumper car rides are loose, and the rubber on the screws of the conductive wheels must not be broken. If there are any cracks, replace them in time (check once a day).
4. Add butter to the small conductive wheels of bumper car rides once a month. (The small conductive wheel plus must be removed)
5. The inflation standard of bumper car rides: between 1.8 kg and 2 kg (check once a day), inflate in time.
6. The brake screws of the bumper car rides should not be too tight or too loose. The standard is to hold the accelerator for 2 to 3 seconds to start the bumper car rides.
Second, the maintenance and maintenance of the new type of bumper car amusement facilities floor
1. Floor maintenance: Every day before the bumper car rides open for business and after the business closes at night, the ground is mopped with a semi-wet mop.
2. Check the top wires on the floor lines around the bumper car rides every day, and tighten them in time if they are loose.
3. Tow with diesel or kerosene once every 2 to 3 months, the main purpose is to decontaminate and prevent rust.
4. Check the ground every time the bumper car rides are turned on. Metals and sundries are not allowed. The main purpose is to prevent the control cabinet from burning.
5. Check that the screws around the bottom plate of the bumper car rides are all tightened once a day.
6. Check the opening screws of each floor. If the 2nd, 4th, 6th, 7th, and 8th screws are loose, tighten them in time, once a day.
In the running-in stage of the new amusement equipment of bumper cars. The new friction contact surface has some roughness, and the contact area of the test machine is very small. Therefore, at the beginning of the running-in of the bumper car rides, the wear is very rapid. The contact area gradually increases, the surface becomes relatively smooth and flat, and the wear rate gradually decreases. When it reaches a certain level, it tends to be stable, and this is the end of the running-in stage. The wear amount in this period is called the initial wear amount.
The running-in stage of the new amusement facilities of bumper cars is that people consciously use the slight wear at this stage to create conditions for stable wear and tear in normal operation. In this stage, for the facilities that have not been run-in, the regulations such as load reduction, deceleration, and reasonable operation should be followed, lubricating oil with lower viscosity should be added, and the temperature should be kept as constant as possible. In addition, in order to shorten the running-in period, appropriate processes can be adopted to improve the utilization rate of the facilities. When the running-in is completed, clear the lubrication system and use lubricating oil that meets the quality requirements.
Custom message
