The Leading Amusement Ride Manufacturer in China.

Safety measures and operating measures for amusement equipment

by:Jinma Rides     2022-08-19
Safety measures and operating measures for amusement equipment

2021/9/26 10:36:48

There are many types of amusement equipment, but no matter what kind of amusement equipment, you must pay attention to the guidelines. So what standards and insurance measures have you learned about the need for amusement equipment?

1) When the amusement facility is in operation and the power supply is suddenly cut off or the equipment fails, which endangers the passengers, an automatic or manual emergency stop device must be provided.
2) After the amusement equipment fails during operation, measures should be taken to relieve passengers.
3) The number of wire ropes or chains used to hang the passenger part shall not be less than two. The connection with the seat part must be considered to be able to maintain balance when one is disconnected.
4) The door that closes the cabin above 1m from the ground must be equipped with two locking devices or one locking device with safety that cannot be opened by passengers inside. Blocks at the entrance and exit of the non-enclosed cockpit should also have a locking device with safety.
5) The overall structure of the passenger part of the amusement facility running in the air should be firm and reliable, and insurance measures should be taken for its important parts.

Passenger restraint device for amusement equipment:

1) Restraint device: It should be reliable and comfortable, and the parts that are in direct contact with the passenger have appropriate softness. The restraint device should be designed to prevent a certain part of the passenger from being pinched or crushed, and should be easy to adjust and operate.
2) Pressure bar: When the amusement facility is running, it may lead to the danger of passengers being thrown out, a corresponding type of pressure bar must be set up; the pressure bar itself must have sufficient strength and locking force to ensure that tourists are not thrown out or dropped. , and remains locked until the device stops functioning.
3) Belt: It can be used alone on the facilities with slight swing or slow lifting speed, no flipping and no danger of being thrown out. Generally, the belt should be equipped with an auxiliary handle. For intense sports facilities, the belt can be used as an auxiliary restraint device.
4) When the amusement facilities are in operation, when the passengers may be moved, collided or thrown out or slipped out of the ride, a passenger restraint device must be provided. For more dangerous amusement facilities, two sets of independent restraint devices should be considered if necessary. Belts, pressure bars, stop bars, etc. can be used.
Requirements for fences and platforms:
1) The opening direction of the fence gate should be consistent with the direction of travel of passengers (except for special circumstances). In order to prevent injury to the hands of personnel when the door is closed, the gap between the door frame and the column should be appropriate, or other protective measures should be taken. .
2) Fences should be set at the entrance and exit respectively, and guide fences should be set at the entrance. The platform should have anti-skid measures.
For amusement facilities that ride on and off while running, the entrance and exit of the passenger part should not be higher than 300 mm from the platform. The height of the entrance and exit of the passenger part of other amusement facilities from the platform should be easy to get on and off.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: