Small playground equipment needs to be well maintained to effectively extend its service life

Small playground equipment must be well maintained to effectively extend its service life.
The plastic part and glass fiber can be diluted and soaked with soapy water, disinfectant washing powder, bleach, etc., then scrubbed with a soft cloth or soft brush, and then rinsed with water Clean, dry with a cleaning cloth or sun dry, and finally spray 84 disinfectant for disinfection.
The soft sponge part can be scrubbed with a soft cloth dipped in soapy water, or placed in the sun for disinfection. The wooden parts that are resistant to moisture, heat and do not fade can be washed in soapy water and dried, and then sprayed with 84 disinfectant.
If you need to remove rust on the metal part, you can use a brush to remove the floating rust and wipe it with a dry cloth; after exposure to the sun, you can use a colorless Sanhe self-painting paint with a distance of about 20 cm. Spray it again after drying to protect it. Wash, dry and disinfect after the paint is completely dry. When cleaning parts of Naughty Castle electrical appliances, first make sure that the power is cut off and watering is forbidden. Generally, wipe with a damp cloth, and then connect to the power supply after it is completely dry.
All amusement equipment, open-air slides, and drill barrels should not have accumulated water after rain. If there is, a hole with a diameter of 4 mm must be drilled at the lowest point to drain water. If it is an indoor activity room, floor, wall, etc., it should be disinfected by ultraviolet radiation every day, and the room should be ventilated frequently, and it should be sprayed and disinfected with hydrogen peroxide once a week.
At the same time as disinfection, be sure to check whether the connection part is firm, the connection part with frequent metal movement is refueled, and whether the electrical circuit and common components are damaged.