What are the safety standards for indoor amusement equipment
What are the safety standards for indoor amusement equipment
2018-11-13 138 times
Speaking of playgrounds, both adults and children like it very much, because in the playground, you can release yourself to the fullest. In fact, playgrounds are indoors in addition to being outdoors, and the main target of indoor playground equipment is children, but what are the safety standards for indoor playground equipment?
1. Safety and insurance measures
For the passenger part of the amusement equipment running in the air, the overall structure should be firm and reliable, and insurance measures should be taken for its important parts.
The number of wire ropes or chains used to suspend the passenger part shall not be less than two. The connection with the seat part must be considered to be able to maintain balance when one is disconnected.
The door that closes the cabin above 1m from the ground must be equipped with two locking devices or one locking device with safety that cannot be opened by passengers inside. Blocks at the entrance and exit of the non-enclosed cockpit should also have a locking device with safety.
When the amusement facility is in operation and the power supply is suddenly cut off or the equipment fails, which endangers the safety of passengers, an automatic or manual emergency stop device must be provided.
After the amusement equipment fails during operation, there should be measures to relieve the passengers.
2. Passenger safety restraint device
When the amusement equipment is running, when the passengers may be moved, collided or thrown out or slipped out of the ride, a passenger restraint device must be provided. For more dangerous amusement facilities, two sets of independent restraint devices should be considered if necessary. Seat belts, safety bars, stop bars, etc. can be used.
Restraint device: It should be reliable and comfortable, and the parts that are in direct contact with the passenger should have appropriate softness. The restraint device should be designed to prevent a certain part of the passenger from being pinched or crushed, and should be easy to adjust and operate.
Seat belt: It can be used alone on the facilities with slight swing or slow lifting speed, no flipping and no danger of being thrown out. The use of seat belts should generally be equipped with auxiliary handles. For intense sports facilities, seat belts can be used as auxiliary restraint devices.
Safety pressure bar: When the amusement facility is running, it may cause the danger of passengers being thrown out, a corresponding type of safety pressure bar must be installed; the safety pressure bar itself must have sufficient strength and locking force to ensure that tourists are not Tossed or dropped, and remains locked until the device stops functioning.
3. Safety requirements for safety platforms
Safety fences should be set at the entrance and exit respectively, and guide fences should be set at the entrance. The platform should have anti-skid measures.
The opening direction of the safety fence gate should be consistent with the direction of travel of passengers (except in special circumstances). In order to prevent injury to the hands of personnel when the door is closed, the gap between the door frame and the column should be appropriate, or other protective measures should be taken.
For amusement facilities that ride on and off while running, the entrance and exit of the passenger part should not be higher than 300 mm from the platform. The height of the entrance and exit of the passenger part of other amusement facilities from the platform should be easy to get on and off.
After reading the above knowledge about indoor amusement equipment, I don’t know how much you have learned, so let’s take a good look at it, and this knowledge is very useful for people who want to open indoor playground equipment. It is helpful, so you must take a good look at the knowledge I have summarized for you.
