Specification Analysis of Various Large Amusement Equipment
by:Jinma Rides
2022-09-29
Specification Analysis of Various Large Amusement Equipment
276
2021/9/24 5:41:41
There are many types of large-scale amusement equipment, and the measures for all kinds of large-scale amusement equipment must be ensured. So how to regulate these large-scale amusement equipment?
, for the sliding class, such as 'roller coaster', the acceleration allowable value has been increased. This is because when the 'roller coaster' descends from a high place to a low place, the speed is very fast and the acceleration is very large. In order to prevent the passengers from being hurt, the acceleration should be limited within a certain range.
Second, various loads are added, such as wind load, because when the wind force is above level 6, the speed of itself plus the impact force, the passenger may be thrown out of the wind load, which is very dangerous and must be stopped The operation of amusement facilities.
Third, the coefficient has been adjusted and decreased. Originally a common material can meet the requirements, there is no need to use special materials. In the past, the coefficient was set too high, resulting in waste of materials and increased cost.
Fourth, new requirements for evaluation and analysis have been added.
Fifth, the standard of water amusement facilities has been increased.
276
2021/9/24 5:41:41
There are many types of large-scale amusement equipment, and the measures for all kinds of large-scale amusement equipment must be ensured. So how to regulate these large-scale amusement equipment?
, for the sliding class, such as 'roller coaster', the acceleration allowable value has been increased. This is because when the 'roller coaster' descends from a high place to a low place, the speed is very fast and the acceleration is very large. In order to prevent the passengers from being hurt, the acceleration should be limited within a certain range.
Second, various loads are added, such as wind load, because when the wind force is above level 6, the speed of itself plus the impact force, the passenger may be thrown out of the wind load, which is very dangerous and must be stopped The operation of amusement facilities.
Third, the coefficient has been adjusted and decreased. Originally a common material can meet the requirements, there is no need to use special materials. In the past, the coefficient was set too high, resulting in waste of materials and increased cost.
Fourth, new requirements for evaluation and analysis have been added.
Fifth, the standard of water amusement facilities has been increased.
Custom message