The braking system of children's indoor playground equipment should adhere to the locked state

Any machine parts will be worn or loosened at different levels during the operation of the equipment, and children's indoor playground equipment is no exception. If the brake assembly of the children's indoor amusement equipment is worn or loosened, it is likely that it will be difficult to put the equipment on when it encounters an urgent environment. Therefore, operators of children's indoor playground equipment must often reflect on whether the brake assembly of the equipment is malfunctioning and useful. Especially for large-scale amusement equipment, we must test whether all aspects of the equipment can be used normally before opening every day, and then open the door after it is sure that it is correct.
When the children's indoor playground equipment is in operation, if the energy source is cut off or the brake system control is suspended, the braking system should maintain the locked state (except for special circumstances) and stop the operation of the children's indoor playground equipment. The braking energy torque (force) of the brake assembly of the children's indoor playground equipment should be greater than 1.5 times the additional load torque (force). The inductive force of the handle of the hand control actuator should be 100～200 N. The brakes of children's indoor playground equipment should be stable and reliable, and should not cause the passengers to feel a significant blow or cause the equipment layout to have significant vibration or sway. The braking acceleration rate is usually not more than 5.0m/s2. An acceleration brake can be added when needed.