RAAPA EXPO 2024, Russia
IMMERSIVE RIDES
The disassembly and maintenance method of the mobile water park bracket pool,
by：Jinma Rides
2022-08-16
The disassembly and maintenance method of the mobile water park bracket pool,
2018-07-02 09:23:0567
The disassembly, assembly and maintenance method of the mobile water park support pool, the maintenance of the PVC fabric is reflected in the application of the daily water treatment circulation system, keeping the water in the support pool clean; Then it is air-cooled, dried, and packed into storage. 1. Drain the water in the pool, and then release the gas in the edge air chamber for cleaning. Second, first primer treatment. Wipe the area to be repaired and the patch clean, apply the special glue evenly, and then blow it with a hair dryer until it is not sticky, and it can be air-dried naturally. 3. Repair glue treatment. Apply the special glue evenly to the repaired area and patch that was just dried, and handle the same as above until it is not sticky. Fourth, stick and. Align the patch to the patched area, apply it slowly from one direction, be careful not to create air bubbles, and then press it flat by hand. Fifth, press firmly. After sticking, put it on a flat hard object, add a flat hard weight on it and press it for 24 hours before use.
2018-07-02 09:23:0567
The disassembly, assembly and maintenance method of the mobile water park support pool, the maintenance of the PVC fabric is reflected in the application of the daily water treatment circulation system, keeping the water in the support pool clean; Then it is air-cooled, dried, and packed into storage. 1. Drain the water in the pool, and then release the gas in the edge air chamber for cleaning. Second, first primer treatment. Wipe the area to be repaired and the patch clean, apply the special glue evenly, and then blow it with a hair dryer until it is not sticky, and it can be air-dried naturally. 3. Repair glue treatment. Apply the special glue evenly to the repaired area and patch that was just dried, and handle the same as above until it is not sticky. Fourth, stick and. Align the patch to the patched area, apply it slowly from one direction, be careful not to create air bubbles, and then press it flat by hand. Fifth, press firmly. After sticking, put it on a flat hard object, add a flat hard weight on it and press it for 24 hours before use.
Custom message
Related Products
