The installation and maintenance of the electrical equipment of the amusement equipment shall be the responsibility of a licensed electrician
The installation and maintenance of the electrical equipment of the amusement equipment shall be the responsibility of a licensed electrician
2019-06-16 00:00:00116
If the floor mat of the amusement equipment is made of polypropylene material, the cost performance is very high, because polypropylene material is relatively cheap; acrylic material. If the play equipment chooses acrylic pads, it will be softer and more comfortable, but less wear-resistant. Polyester material. The wear resistance of the material pad is also excellent, and the heat resistance is also better; nylon material. Pads of this material have better wear resistance and are easier to clean, but have the disadvantage of being easily deformed. Electrical Safety: Electrical equipment of playground amusement equipment, such as floor fans, hand-held grinders, hand drills and other power tools must be installed with leakage protection switches for independent protection. If you find someone getting an electric shock, do not pull the shock with your hands. Turn on the power switch as soon as possible or use a dry wooden stick or bamboo pole to pick up the wires, and use the correct artificial respiration method for on-site rescue immediately. The installation and maintenance of the electrical equipment of the amusement equipment shall be the responsibility of a licensed electrician. Maintenance work in operation is a lengthy process. Ensuring that your play equipment runs for a long time without breaking down is not a form of maintenance. We must always observe and test important parts and replace relevant parts. Equipment motors, equipment arms, bearings, etc. are subject to frequent testing and maintenance to protect visitors. If the floor mat of the play equipment is made of polypropylene, the cost performance is very high, because polypropylene material is relatively cheap; acrylic material. If the children's play equipment chooses an acrylic pad, it will be softer but less wear-resistant. Polyester material. Material pad also has excellent abrasion and heat resistance; nylon material. Pads of this material have better wear resistance and are easier to clean, but have the disadvantage of being easily deformed. Electrical: The electrical equipment of playground amusement equipment, such as floor fans, hand-held grinders, hand drills and other power tools, are equipped with leakage protection switches, which can be independently protected. If you see someone getting an electric shock, do not use hand strikes. Turn on the power switch as soon as possible or use a dry stick or bamboo pole to pick up the wire, and immediately use the correct artificial respiration method for on-site rescue. The installation and maintenance of the electrical equipment of the amusement equipment shall be the responsibility of a licensed electrician.
