The purchase of new amusement equipment should be highly entertaining
The purchase of new amusement equipment should be highly entertaining
2019-09-09 11:59:51118
New play equipment has to be fun. Strong entertainment equals playability. Passengers have a lot of fun seeing the rides. Operators purchase equipment from amusement equipment manufacturers in order to make profits. If the equipment purchased is not enough, it will definitely affect the interests of operators. Once word of mouth is formed, there will be no market for this kind of commodity in the future. Any new type of commodity must contain innovative concepts. The new concept of the new amusement equipment is mainly reflected in two aspects: the innovation of the operation method; the innovation of the surface of the amusement equipment. The legality of its operation should be considered at the beginning of the cost of any new amusement equipment, and the choice of each component can constitute false notice, the degree of protection and dangerous water in operation. Nowadays, the right or wrong way to play on the playground is always to focus on the hygiene of children's play equipment, so be careful when doing laundry. If the wash is not clean, it will give the user a bad image for the user to play next time. I figured it wasn't here. Introduce the washing methods of different types of small amusement equipment. 1. Suppose it is an indoor playground, the ground, walls, etc., are disinfected with ultraviolet rays every day, and the room is often ventilated. Disinfect with hydrogen peroxide once a week. To ensure the health and safety of children, children's play equipment operators are determined not to be sneaky. In addition, good gaming conditions will make passengers feel very happy and relaxed. 2. The soft sponge part can be washed with soft cloth, sputum water, or exposed to the sun; heat-resistant, moisture-proof, non-fading wooden parts can be washed with Panyu water, dried in the sun, then sterilized, and the liquid end sterilized. 3. Plastics and glass fibers can be diluted with Panyu water, disinfected with washing powder, bleaching powder, etc., soaked with a soft cloth or soft brush, then rinsed with clean water, then wiped or dried with a cleaning cloth, and then used 84 disinfectant to complete the disinfection. 4. Make sure that the electrical parts of the circuit are stable and de-energized during the cleaning process. Direct water cleaning is prohibited. It is usually wiped with a damp cloth and then connected to a power source after drying. 5. The metal part can be brushed to the floating embroidery, then wiped with a dry cloth, exposed to sunlight, can be sprayed again, dry and sprayed again, to protect the effect, wait for the paint to dry, then wash, dry and disinfect. Plastic parts and fiberglass can be diluted with soapy water, disinfected with washing powder, bleaching powder, etc., then wiped with a soft cloth or soft brush, then rinsed with water, wiped or dried with a cleaning cloth, and then sprayed with 84 disinfectant. The soft sponge part can be washed with a soft cloth dipped in soapy water or placed in the sun for disinfection. Moisture-proof, heat-resistant, non-fading wooden parts can be washed and dried with soapy water, and then sprayed with 84 disinfectant. If the metal parts are required to be rusted, please remove the rust with a brush and wipe with a dry cloth; after exposure to the sun, use a colorless three-card spray in spray paint to a distance of about 20 cm. After drying, spray again to protect the paint. After the paint is completely dry, clean, dry and sanitize. When cleaning Naughty Circuit electrical components, first make sure to cut off the power and do not water. Typically, wipe with a damp cloth, then connect to a power source after drying. All play equipment, open-air slides, and drill pipes should be free of water after rain.
