Features and cleaning and maintenance of new amusement equipment

Features and cleaning and maintenance of new amusement equipment

2019-09-11 09:07:36120

1. Entertainment The new amusement equipment must be very interesting. Strong entertainment equals playability. Passengers have a lot of fun seeing the rides. Operators purchase equipment from amusement equipment manufacturers in order to make profits. If the equipment purchased is not enough, it will definitely affect the interests of operators. Once word of mouth is formed, there will be no market for this kind of commodity in the future. 2. The concept of innovation Any new type of commodity must contain the concept of innovation. The new concept of the new amusement equipment is mainly reflected in two aspects: the innovation of the operation method; the innovation of the surface of the amusement equipment. 3. The plan should be reasonable Any new type of amusement equipment should consider the legality of its operation at the beginning of the cost, and the choice of each part can constitute a wrong notice, the degree of protection when operating and dangerous water. Nowadays, the right or wrong way to play on the playground is always to focus on the hygiene of children's play equipment, so be careful when doing laundry. If the wash is not clean, it will give the user a bad image for the user to play next time. Then introduce to us the washing methods of different types of small amusement equipment. 1. Suppose it is an indoor playground, the ground, walls, etc., are disinfected with ultraviolet rays every day, and the room is often ventilated. Disinfect with hydrogen peroxide once a week. To ensure the health and safety of children, children's play equipment operators are determined not to be sneaky. Also, good play conditions will make passengers feel very happy and relaxed, and the next time they want to play, they will think of us here. 2. The soft sponge part can be washed with soft cloth, sputum water, or exposed to the sun; heat-resistant, moisture-proof, non-fading wooden parts can be washed with Panyu water, dried in the sun, then sterilized, and the liquid end sterilized. 3. Plastics and glass fibers can be diluted with Panyu water, disinfected with washing powder, bleaching powder, etc., soaked with a soft cloth or soft brush, then rinsed with clean water, then wiped or dried with a cleaning cloth, and then used 84 disinfectant to complete the disinfection. 4. Make sure that the electrical parts of the circuit are stable and de-energized during the cleaning process. Direct water cleaning is prohibited. It is usually wiped with a damp cloth and then connected to a power source after drying. 5. The metal part can be brushed to the floating embroidery, then wiped with a dry cloth, exposed to sunlight, can be sprayed again, dry and sprayed again, to protect the effect, wait for the paint to dry, then wash, dry and disinfect.