How to maintain and maintain children's play equipment

How to maintain and maintain children's play equipment

2018-08-08 14:49:1589


When buying children's play equipment, don't just focus on the price of the product. Quality is the life of amusement equipment, only a qualified product will bring itself a steady stream of wealth; for amusement equipment, only when the passenger flow is large can it bring economic benefits, if the equipment falls off the chain at a critical moment, maintenance What are the consequences for us due to the costs and losses caused by the suspension of business? Therefore, we need to consider whether the cost-effectiveness of the product is appropriate. To purchase children's play equipment, all procedures must be complete. Nowadays, the country has increased the inspection of amusement equipment, especially in squares, parks, supermarkets, etc. If the procedures are not complete, it may be a temporary benefit, but it is not a long-term solution. When purchasing a product, it depends on whether the accessories used in the product are produced by regular manufacturers, and whether the overall design is reasonable, so that the product can be operated easily. Children's play equipment is for children to play, because children play a lot and use more frequently, so the loss of children's play equipment is relatively large, especially pay attention to physical health, so as to protect children from exposure to bacteria as much as possible, protect children's health Growth. Therefore, we should carry out reasonable cleaning, maintenance and maintenance of children's play equipment, how to operate? For those plastic parts and fiberglass, we can use soap and water, sterilize, soak and dilute after bleaching, use a soft cloth or soft Gently scrub with a brush, rinse with clean water, dry or dry with a clean cloth. Finally, spray some 84 disinfectant. For the soft sponge part of children's play equipment, we can use a soft cloth to clean with soapy water. Moisture-proof, Heat-resistant, non-fading wooden parts can be washed with soapy water, and then sprayed with 84 disinfectant to disinfect. For the metal parts of children's play equipment, if rust is required, please remove the rust with a brush and wipe it with a dry cloth. When the electrical part of the circuit is cleaned, first make sure that the power supply is cut off, and water is prohibited. The wet cloth is usually cleaned, and then the power is turned on after drying. If it is an indoor activity room, floor, wall, etc., the room should be ventilated frequently . Disinfect with hydrogen peroxide once a week. For children who have disinfected amusement equipment while playing, it is also necessary to check whether the connection parts are firm, the metal is often active in the connection parts, refueling, whether all parts of the wiring and common parts are damaged, and can not keep sharp spines for safety hazards, etc. 1. Bumper cars If the insulating rubber sleeve of the small conductive wheel is damaged, it should be replaced in time. (Check once a day) 2. The inflation standard of the bumper car: between 1.8 kg and 2 kg (check once a day). Inflate in time 3. Add butter to the small conductive wheel of the bumper car once a month (the small conductive wheel must be removed) 4. The brake screw of the bumper car should not be too tight or too loose. The standard is to press the accelerator for 2 to 3 seconds when the bumper car starts. Clock start is best