The electrical system of small playground equipment belongs to the core operation1

For small playground equipment, the delivery is all logistics transportation, so the first step is to unload the goods during the inspection. When unloading the goods, the workers need to be careful to handle it with care to avoid secondary damage, and at the same time, pay attention to check the appearance and integrity of the small playground equipment parts, so as to avoid wrong hair and missing hair.
If there is a damage problem, it should be solved directly with the manufacturer or the on-site installer depending on the degree. The second is to check the fixed position of the installation of the whole machine or pre-buried. This part is the foundation of the foundation. If there is a problem in this aspect, it will be a waste of time and effort in the follow-up link.
Then there is the inspection of the normal operation of the electrical system and transmission of the small playground equipment, which belongs to the core operation. Once this problem occurs, it must be solved carefully. From a safety point of view, it is very necessary to install the ground wire for the whole amusement project and the electric box, and this aspect should be checked more seriously.
Of course, no matter which device you buy, it must be equipped with an instruction manual and a certificate of conformity. It must be remembered that it is better to test the machine on site. After the installation of the small playground equipment is completed, it will be idle for more than an hour, and there will be no obvious abnormal noise and defects, which proves that you have bought this equipment.